Ayna, TuncerDilibal, Savas2024-06-132024-06-1320221392-871610.21595/jve.2022.225182-s2.0-85141874689https://doi.org/10.21595/jve.2022.22518https://hdl.handle.net/11501/1375Water jet ejectors are the silent pumping fluid devices which doesn't have any rotating parts in functional industrial applications. The dimensionless geometrical parameters effects ejector suction capacity. In this study, it is found that optimum design intervals have been determined by using the Response Surface Method (RSM). Design ranges determined in the dimensionless study have been used in the improvement of the suction capacity of an existing ejector. The suction capacity of the existing ejector is investigated via numerical and experimental analysis. Two new water jet ejector designs (D1 and D2) are built to improve the suction capacity of the initial water jet ejector (D0). The generated design parameters have been analyzed by using SolidWorks flow analysis and optimization software. The suction capacity of the ejector has been determined through the iterative numerical analysis for the selected geometrical parameters under the applied design conditions. The effect of design parameters on the suction capacity of the water jet ejectors is unveiled through numerical and experimental analysis. The established designs were produced as two novel bronze water jet ejectors. The suction capacities of the produced bronze water jet ejectors have been investigated experimentally. The numerical results have been validated using the experimental results. It is achieved that the suction capacity of the manufactured water jet ejector with the improved design (D2) is suddenly increased from 52.05 m3/h to 103.4 m3/h.eninfo:eu-repo/semantics/openAccessWater Jet EjectorEjector PerformanceEjector DesignCfd SimulationDesign ImprovementDoeCfdPerformanceArticle13767Q3136424WOS:000889224100001N/A