Effect of welding current on joining of AISI 316 L steel by TIG welding process

Basit Öğe Kaydı
dc.contributor.authorŞimşek, Vedat
dc.contributor.authorTopuz, Polat
dc.date.accessioned2025-09-03T13:02:22Z
dc.date.available2025-09-03T13:02:22Z
dc.date.issued2025
dc.departmentMeslek Yüksekokulu, Gedik Meslek Yüksekokulu, Kaynak Teknolojisi Programı
dc.description.abstractAISI 316L is one of the most widely used austenitic stainless-steel types today. Since it has less carbon content than AISI 316, annealing is not required even in thick sections, especially after welding processes. In this study, 6 pieces AISI 316L plate in 220x70x10 mm were combined by TIG welding method with different welding currents, keeping the conditions the same, and their differences were tried to be revealed experimentally. Micro and macro structural properties, changes in hardness, fracture energies, three-point bending tests and tensile tests of the samples of which welding processes were completed were carried out according to current standards and the results were compared with each other. As a result of the experiments and analyses, it has been determined that the change in the welding current value affects the mechanical properties of the welded joint when joining AISI 316 L austenitic stainless steel with TIG welding method and the most appropriate value for this study is 150 A.
dc.identifier.doi10.61150/ijonfest.2025030101
dc.identifier.endpage13
dc.identifier.issn3023-4379
dc.identifier.issue1
dc.identifier.startpage1
dc.identifier.urihttps://doi.org/10.61150/ijonfest.2025030101
dc.identifier.urihttps://dergipark.org.tr/en/pub/ijonfest/issue/91107/1407316
dc.identifier.urihttps://hdl.handle.net/11501/2359
dc.identifier.volume3
dc.institutionauthorTopuz, Polat
dc.institutionauthorid0000-0001-9715-6682
dc.language.isoen
dc.publisherIstanbul Gedik University
dc.relation.ispartofInternational Journal of New Findings in Engineering, Science and Technology
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectAISI 316 L
dc.subjectTIG
dc.subjectWelding Current
dc.subjectExperimental
dc.subjectMicrostructure
dc.subjectMechanical Properties
dc.titleEffect of welding current on joining of AISI 316 L steel by TIG welding process
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Tam Metin / Full Text
Boyut:
1.1 MB
Biçim:
Adobe Portable Document Format
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Kapalı Erişim
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed to upon submission
Açıklama:
İndir

Koleksiyon

Gedik Meslek Yüksekokulu Koleksiyonu
International Journal of New Findings in Engineering, Science and Technology