Effect of carbon fiber additive on tensile properties of large scale additive manufactured (LSAM) ABS single wall parts

dc.contributor.authorEyercioğlu, Ömer
dc.contributor.authorTek, Engin
dc.contributor.authorAkeloğlu, Mehmet Ali
dc.contributor.authorAladağ, Mehmet
dc.date.accessioned2025-02-09T14:35:59Z
dc.date.available2025-02-09T14:35:59Z
dc.date.issued2023
dc.departmentMeslek Yüksekokulu, Gedik Meslek Yüksekokulu, Mekatronik Programı
dc.description.abstractAdditive Manufacturing (AM) is one of the most studied technologies to produce different parts today. Large-scale additive manufacturing (LSAM) is used to produce complex parts without further technological processes and for the production of large-sized polymer parts. In order for the parts produced from polymer materials to show better mechanical properties, a range of different materials is required. In this study, the tensile properties of 3D printed ABS single wall parts using LSAM were investigated experimentally. The effect of carbon fiber (0, 5%, and 10%) additive on the main mechanical properties of ABS was investigated. The tests were carried out according to ASTM D638 standards as the spatial printing direction (0? and 90?). According to the results of the tensile test, ABS material reinforced with 5% carbon fiber showed higher load resistance than other mixture ratios. In all groups, it was observed that the samples with a horizontal (0?) orientation compared to the printing direction showed better performance.
dc.identifier.endpage82
dc.identifier.issn2667-4033
dc.identifier.issue2
dc.identifier.startpage79
dc.identifier.urihttps://hdl.handle.net/11501/2024
dc.identifier.urihttps://dergipark.org.tr/en/pub/tijmet/issue/78746/1401286
dc.identifier.volume6
dc.institutionauthorTek, Engin
dc.institutionauthorid0000-0002-9664-6142
dc.language.isoen
dc.publisherNecip Fazıl Yılmaz
dc.relation.ispartofThe International Journal of Materials and Engineering Technology
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20250209
dc.subjectAdditive Manufacturing (AM)
dc.subjectLarge Scale Additive Manufacturing (LSAM)
dc.subjectAcrylonitrile Butadiene Styrene (ABS)
dc.subjectTensile Strength
dc.subjectCarbon Fiber
dc.titleEffect of carbon fiber additive on tensile properties of large scale additive manufactured (LSAM) ABS single wall parts
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Tam Metin / Full Text
Boyut:
2.12 MB
Biçim:
Adobe Portable Document Format