Experimental Investigation of Wire Arc Additively Manufactured Inconel 625 Superalloy

Basit Öğe Kaydı
dc.authoridDilibal, Savas/0000-0003-4777-7995
dc.authoridGürol, Uğur/0000-0002-3205-7226
dc.authoridTUMER, MUSTAFA/0000-0002-1931-4750
dc.authorwosidDilibal, Savas/Q-3748-2017
dc.authorwosidGürol, Uğur/AAN-1097-2021
dc.authorwosidTUMER, MUSTAFA/F-7418-2018
dc.contributor.authorGurol, Ugur
dc.contributor.authorTumer, Mustafa
dc.contributor.authorDilibal, Savas
dc.date.accessioned2024-06-13T20:17:52Z
dc.date.available2024-06-13T20:17:52Z
dc.date.issued2023
dc.departmentİstanbul Gedik Üniversitesien_US
dc.description.abstractThe aim of the present study was to reveal how the microstructure and mechanical properties of Inconel 625 superalloy produced via wire arc additive manufacturing (WAAM) changed in relation to deposition direction. Results showed that the microstructure mainly consists of columnar dendrites including some intermetallic and carbides constituents, which are Laves and NbC phases. The hardness values showed heterogeneous distribution from bottom to top and mainly change between 275 +/- 15 to 298 +/- 16 HV5 except for the initial area reaching 318 +/- 14 HV5. The tensile test results revealed that the stress-strain responses of the samples change depending on the extracted direction. The lowest elongation was obtained at the transverse top and bottom regions with 33.5 +/- 1.5% and 35 +/- 6% while the highest elongation was obtained at the angular top and bottom with 48.5 +/- 6.7% and 55.5 +/- 2%. The results confirmed the more pronounced difference with sample direction, indicating anisotropy in ductility.en_US
dc.identifier.doi10.1007/s12666-022-02797-x
dc.identifier.endpage1379en_US
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85145860464en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1371en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-022-02797-x
dc.identifier.urihttps://hdl.handle.net/11501/1122
dc.identifier.volume76en_US
dc.identifier.wosWOS:000910807600002en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions of the Indian Institute of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDirect Metal Depositionen_US
dc.subjectWire Arc Additive Manufacturingen_US
dc.subjectInconel 625en_US
dc.subjectIntermetallicen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectMicrostructural Evolutionen_US
dc.subjectDissimilar Weldsen_US
dc.subjectStainless-Steelen_US
dc.subjectDepositionen_US
dc.subjectToughnessen_US
dc.subjectStrengthen_US
dc.titleExperimental Investigation of Wire Arc Additively Manufactured Inconel 625 Superalloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu