Omurga cerrahisinde ameliyat planlama ve optimizasyon
Yükleniyor...
Tarih
2019
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
IEEE-Institute of Electrical and Electronics Engineers Inc.
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Üç boyutlu tarama teknolojileri, anatomik modeller, biyouyumlu implantlar ve ortotik/protez modeller gibi tıbbi ihtiyaçlar için yaygın şekilde kullanılmaya başlamıştır. Ancak taranan dokuların üç boyutlu görsellerinin iki boyutlu bilgisayar ekranları kullanılarak görüntülenmesi istenilen etkiyi verememektedir. Sanal gerçeklik teknolojisi ile yapılan cerrahi planlama daha kesin sonuçlar sunuyor olsa da yüksek maliyetler nedeniyle her hastanede uygulanamamaktadır. Bu çalışmada ileri derece bir skolyoz hastasının ameliyat işlemi önceden planlanarak, özellikle kompleks omurga ameliyatlarında kullanılmak üzere ideal bir protokol belirlenmiş ve hedef anatomik doku yapısına uygunluğu analiz edilmiş olup bahsedilen anatomik modelin üretimini gerçekleştirecek katmanlı üretim teknolojileri tabanlı bir ameliyat planlama sistemi ortaya konmuştur.
3D scanning technologies have become widely used for medical needs such as anatomical models, biocompatible implants and orthotic / prosthetic models. However, the use of 3D visuals of the scanned tissues using two-dimensional computer screens cannot give the desired effect. Although surgical planning with virtual reality technology provides more accurate results, it cannot be performed in every hospital due to high costs of the system. In this study, the operation of an advanced scoliosis patient was planned in advance. An ideal protocol to be used especially in complex spine operations was determined and its suitability to the target anatomical tissue structure was analyzed. At the same time, a surgical planning system based on layered manufacturing technologies to realize the production of the mentioned anatomical model is introduced.
3D scanning technologies have become widely used for medical needs such as anatomical models, biocompatible implants and orthotic / prosthetic models. However, the use of 3D visuals of the scanned tissues using two-dimensional computer screens cannot give the desired effect. Although surgical planning with virtual reality technology provides more accurate results, it cannot be performed in every hospital due to high costs of the system. In this study, the operation of an advanced scoliosis patient was planned in advance. An ideal protocol to be used especially in complex spine operations was determined and its suitability to the target anatomical tissue structure was analyzed. At the same time, a surgical planning system based on layered manufacturing technologies to realize the production of the mentioned anatomical model is introduced.
Açıklama
Medical Technologies Congress (TIPTEKNO) -- 03-05 October, 2019 -- İzmir, Turkey
Anahtar Kelimeler
Cerrahi Planlama, Görüntü Tabanlı Cerrahi, Ortopedik Cerrahi, Simulasyon, Surgical Planning, Image Guided Surgery, Orthopedic Surgery, Simulation
Kaynak
Medical Technologies Congress (TIPTEKNO)
WoS Q Değeri
N/A
Scopus Q Değeri
N/A