FRICTION STIR BUTT WELDABILITY OF DISSIMILAR ALLOYS AA5754 AND AA1050

Basit Öğe Kaydı
dc.authorwosidÇoban, Ozan/JED-3718-2023
dc.contributor.authorKaragoz, Idris
dc.contributor.authorCakir, Recep
dc.contributor.authorCoban, Ozan
dc.contributor.authorBoumerzoug, Zakaria
dc.date.accessioned2024-06-13T20:18:18Z
dc.date.available2024-06-13T20:18:18Z
dc.date.issued2023
dc.departmentİstanbul Gedik Üniversitesien_US
dc.description.abstractThe main objective of this study was to assemble by friction stir welding two dissimilar sheets made with AA5754 Al-Mg alloy and AA 1050 aluminum, which are intensely used in the automotive industry. The applied welding speed was 75mm/min with different tool rotational speeds (780, 1330 and 2440rpm). The mechanical properties and the microstructure of the welded joint were investigated by the tensile test, the three-point bending test, the microhardness measurements, the optical microscopy, scanning electron microscopy and energy dispersion spectrometry (EDS). The main zones were observed in the welded joint. Optimum mixing was achieved during the assembly process with a welding tool rotation speed of 2440rpm. It was determined that the microstructures formed had a significant effect on the hardness and tensile strength of welded dissimilar materials such as the precipitated phases in the nugget zone. The best result in terms of tensile strength was obtained at 780rpm with 80% performance.en_US
dc.description.sponsorshipYalova University Scientific Research Projects Coordination Unit [2018/AP/0014]en_US
dc.description.sponsorshipThis work was supported by the Yalova University Scientific Research Projects Coordination Unit Grant numbers 2018/AP/0014.en_US
dc.identifier.doi10.1142/S0218625X23500592
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-85165173930en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X23500592
dc.identifier.urihttps://hdl.handle.net/11501/1316
dc.identifier.volume30en_US
dc.identifier.wosWOS:001020675000001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectButt Weldingen_US
dc.subjectFriction Stir Weldingen_US
dc.subjectDissimilar Weldingen_US
dc.subjectAluminum Alloysen_US
dc.subjectMicrostructureen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectMicrostructureen_US
dc.subjectFswen_US
dc.subjectTensileen_US
dc.subjectJointsen_US
dc.subjectForceen_US
dc.subjectFatigueen_US
dc.titleFRICTION STIR BUTT WELDABILITY OF DISSIMILAR ALLOYS AA5754 AND AA1050en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu