Hydrometallurgical nickel and cobalt production from lateritic ores: optimization and comparison of atmospheric pressure leaching and pug-roast-leaching processes

dc.contributor.authorÇoban, Ozan
dc.contributor.authorBaşlayıcı, Serkan
dc.contributor.authorBuğdaycı, Mehmet
dc.contributor.authorAçma, Mahmut Ercan
dc.date.accessioned2024-06-13T20:18:34Z
dc.date.available2024-06-13T20:18:34Z
dc.date.issued2021
dc.departmentFakülteler, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü
dc.description.abstractCorresponding to the technological developments, production and consumption of nickel have increased greatly over time due to its unique mechanical and chemical properties. Therefore, the production of nickel will always keep its importance. The availability of laterite ores, which are oxide type ores, is 86% of the nickel reserves on the Earth, and the processes used in the production of nickel from sulphide type ores have negative environmental effects. Therefore, recovery of nickel from lateritic ores has become increasingly important in recent years. In this study, the aim was to determine the optimum parameters of nickel and cobalt production from limonite type lateritic nickel ores, which were taken from Manisa Caldag region of Turkey, using atmospheric pressure sulfuric acid leaching and pug-roast-leach process. When the results obtained in these processes were compared, it was found that the Ni leaching efficiency is nearly 8% higher and iron leaching efficiency (contamination) is nearly 4% lower in the pug-roastleach process. Furthermore, the pug-roast-leach process was completed in 33% lower time compared to the atmospheric pressure sulfuric acid leaching process.
dc.identifier.doi10.36547/ams.27.1.740
dc.identifier.endpage22
dc.identifier.issn1335-1532
dc.identifier.issn1338-1156
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85102523346
dc.identifier.scopusqualityQ2
dc.identifier.startpage17
dc.identifier.urihttps://doi.org/10.36547/ams.27.1.740
dc.identifier.urihttps://hdl.handle.net/11501/1443
dc.identifier.volume27
dc.identifier.wosWOS:000623595300003
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorÇoban, Ozan
dc.institutionauthorid0000-0002-1506-4619
dc.language.isoen
dc.publisherScicell Sro
dc.relation.ispartofActa Metallurgica Slovaca
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectNickel
dc.subjectCobalt
dc.subjectHydrometallurgy
dc.subjectPug-Roast-Leaching
dc.subjectAtmospheric Pressure
dc.titleHydrometallurgical nickel and cobalt production from lateritic ores: optimization and comparison of atmospheric pressure leaching and pug-roast-leaching processes
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Tam Metin / Full Text
Boyut:
583.05 KB
Biçim:
Adobe Portable Document Format