Additive manufacturing and biomechanical validation of a patient-specific diabetic insole

Basit Öğe Kaydı
dc.contributor.authorPeker, Ayfer
dc.contributor.authorAydın, Levent
dc.contributor.authorKüçük, Serdar
dc.contributor.authorÖzkoç, Güralp
dc.contributor.authorÇetinarslan, Berrin
dc.contributor.authorCantürk, Zeynep
dc.contributor.authorSelek, Alev
dc.date.accessioned2024-06-13T20:17:47Z
dc.date.available2024-06-13T20:17:47Z
dc.date.issued2020
dc.departmentMeslek Yüksekokulu, Gedik Meslek Yüksekokulu, Biyomedikal Cihaz Teknolojisi Programı
dc.description.abstractCenters for Disease Control and Prevention (CDC) has reported that lower extremity amputation (LEA) rate of per 1000 diabetic patients is 18.4 because of the complications that first appeared in the foot. A second amputation is also required for 9% to 17% of these patients within the same year although LEA may be preventable. Most of the diabetic foot conditions may be prevented and treated by a therapeutic footwear or a medical device such as an insole or an orthotic shoe. Traditional insole manufacturing is a laborious work that requires specific skills. Moreover, traditional approaches contain harmful material particles that may cause respiratory failure. Unfortunately, manufactured insoles may not be suitable for any mass-produced footwear in all cases. Therefore, patient requires to get insole-specific footwear. In this study, a diabetic insole was manufactured by means of a fused deposition modeling-(FDM) based system and a thermoplastic polymer. Biomechanical functionality was determined according to the applied polymer analysis on each produced sample and foam material. Subsequently, finite element analysis (FEA) was performed to target insole geometry to ensure the quality of the final medical product. Additive and traditional manufactured insoles are compared according to the cost and function. As a result, fabrication of an insole, based on the FDM method, was improved down to 8 h and 9 m. The weight of an insole prototype was 74.74 g, and the material cost was $3.44 while total cost of the traditional foam casting was determined as $35.37 and weight of the insole was 72.6 g for this study. Consequently, benefits of the applied method are evaluated.
dc.identifier.doi10.1002/pat.4832
dc.identifier.endpage996
dc.identifier.issn1042-7147
dc.identifier.issn1099-1581
dc.identifier.issue5
dc.identifier.scopus2-s2.0-85078902330
dc.identifier.scopusqualityQ2
dc.identifier.startpage988
dc.identifier.urihttps://doi.org/10.1002/pat.4832
dc.identifier.urihttps://hdl.handle.net/11501/1061
dc.identifier.volume31
dc.identifier.wosWOS:000510601600001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorAydın, Levent
dc.institutionauthorid0000-0002-2372-1711
dc.language.isoen
dc.publisherWiley
dc.relation.ispartofPolymers for Advanced Technologies
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectAdditive Manufacturing
dc.subjectBiomechanical Functionality
dc.subjectDiabetes
dc.subjectFinite Element Analysis
dc.subjectInsole
dc.subjectPatient-Specific
dc.titleAdditive manufacturing and biomechanical validation of a patient-specific diabetic insole
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
Tam Metin / Full Text
Boyut:
1.89 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Gedik Meslek Yüksekokulu Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu