An investigation on the design of formate and generate face milled hypoid gears

dc.authorscopusid57194528723
dc.authorscopusid55807371600
dc.authorscopusid24366799400
dc.authorscopusid57222066723
dc.authorscopusid57222071942
dc.contributor.authorYilmaz, T.G.
dc.contributor.authorKalay, O.C.
dc.contributor.authorKarpat, F.
dc.contributor.authorDoanli, M.
dc.contributor.authorAltinta, E.
dc.date.accessioned2024-06-13T20:16:05Z
dc.date.available2024-06-13T20:16:05Z
dc.date.issued2020
dc.departmentİstanbul Gedik Üniversitesi
dc.descriptionAmerican Society of Mechanical Engineers (ASME)
dc.descriptionASME 2020 International Mechanical Engineering Congress and Exposition, IMECE 2020 -- 16 November 2020 through 19 November 2020 -- -- 167181
dc.description.abstractHypoid gears are transmission elements that transfer power and moment between shafts whose axes do not intersect. They are similar in structure to spiral bevel gears. However, there are many advantages compared to spiral bevel gears in terms of load carrying capacity and rigidity. Hypoid gear pairs are mostly used as powertrain on the rear axles of cars and trucks. Hypoid gears are manufactured by two essential methods called face-milling and face-hobbing, and there are mainly two relative kinematic movements (Formate® and Generate). In this study, the gears produced with the Face-milling method are discussed. Face milled hypoid gears can be manufactured with both Formate® and Generate, while pinions can only be manufactured with the Generate method. The most crucial factor that determines the performance of hypoid gears is the geometry of hypoid gears. The gear and pinion geometry is directly dependent on the tool geometry, machine parameters, and relative motion between the cradle and the workpiece. The gear geometry determines the contact shape and pressure during power transmission. In this study, the mathematical equation of the cutting tool is set. After that, using differential geometry, coordinate transformation, and the gearing theory, the mathematical equation of hypoid gear is obtained.. Copyright © 2020 ASME.
dc.identifier.doi10.1115/IMECE2020-23972
dc.identifier.isbn9780791884539
dc.identifier.scopus2-s2.0-85101209475
dc.identifier.scopusqualityN/A
dc.identifier.urihttps://doi.org/10.1115/IMECE2020-23972
dc.identifier.urihttps://hdl.handle.net/11501/1025
dc.identifier.volume6
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherAmerican Society of Mechanical Engineers (ASME)
dc.relation.ispartofASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectFace milled
dc.subjectFormate
dc.subjectGenerate
dc.subjectHypoid gear design
dc.subjectAutomobile manufacture
dc.subjectBevel gears
dc.subjectCutting tools
dc.subjectGeometry
dc.subjectMathematical transformations
dc.subjectMilling (machining)
dc.subjectPowertrains
dc.subjectTransmissions
dc.subjectCo-ordinate transformation
dc.subjectDifferential geometry
dc.subjectGearing theory
dc.subjectMachine parameters
dc.subjectMathematical equations
dc.subjectRelative motion
dc.subjectSpiral bevel gears
dc.subjectTool geometry
dc.subjectGear manufacture
dc.titleAn investigation on the design of formate and generate face milled hypoid gears
dc.typeConference Object

Dosyalar