Fabrication of 0.94NBT-0.06BT textured ceramics using plate-like NBT templates and their electrical properties

dc.contributor.authorBerksoy Yavuz, Ayşe
dc.contributor.authorKaya, Mustafa Yunus
dc.contributor.authorAvcı, Tubanur
dc.contributor.authorÇakırbaş, Gizem
dc.contributor.authorMensur, Ebru
dc.date.accessioned2024-06-13T20:17:50Z
dc.date.available2024-06-13T20:17:50Z
dc.date.issued2022
dc.departmentFakülteler, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü
dc.description.abstractThe effect of crystallographic texture on the properties of 0.94(Na0.5Bi0.5TiO3)-0.06BaTiO(3) (0.94NBT-0.06BT) ceramics were investigated in this study. The optimized rectangular plate-like Na0.5Bi0.5TiO3 (NBT) templates synthesized by a three-step molten salt method were used for the texturing. Dimensions of the major surfaces of the templates which were parallel to the (001) planes were measured as 8.4 mu m x 10 mu m (length x width) and 1 mu m thickness on the average. The green textured ceramics were fabricated by tape casting method and then sintered. All ceramics were crystallized in pure perovskite structure and the degree of grain orientation was calculated as f = 91%. Brick wall-like microstructure for the textured NBT-BT ceramics with average grain size of similar to 12 mu m was obtained by scanning electron microscopy. Depolarization temperature (T-d) and temperature of maximum (T-m) of the dielectric permittivity were determined as 119 degrees C and 341 degrees C at 10 kHz for the textured ceramic, respectively. The value of maximum dielectric permittivity of textured ceramics was measured as epsilon(rmax) similar to 5409 at 10 kHz. The high field (@50 kV/cm) piezo-electric d(33)* value was increased from 239 to 412 pm/V by texturing of the 0.94NBT-0.06BT ceramics. NBT template addition and texture development led to a decrease in AC conductivity.
dc.identifier.doi10.1007/s10854-021-07433-w
dc.identifier.endpage2349
dc.identifier.issn0957-4522
dc.identifier.issn1573-482X
dc.identifier.issue5
dc.identifier.scopus2-s2.0-85119986625
dc.identifier.scopusqualityQ2
dc.identifier.startpage2336
dc.identifier.urihttps://doi.org/10.1007/s10854-021-07433-w
dc.identifier.urihttps://hdl.handle.net/11501/1103
dc.identifier.volume33
dc.identifier.wosWOS:000722812200001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorBerksoy Yavuz, Ayşe
dc.institutionauthorid0000-0002-6462-343X
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofJournal of Materials Science-Materials in Electronics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.titleFabrication of 0.94NBT-0.06BT textured ceramics using plate-like NBT templates and their electrical properties
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
Tam Metin / Full Text
Boyut:
2.82 MB
Biçim:
Adobe Portable Document Format