The Fracture Toughness of Fe2B Formed on Boronized AISI 304

Basit Öğe Kaydı
dc.authoridGümüş, Emre/0000-0002-9446-6420
dc.authoridYilmaz, Eren/0000-0001-7264-2588
dc.authorwosidGümüş, Emre/IST-6644-2023
dc.contributor.authorTopuz, Polat
dc.contributor.authorGundogdu, Emine
dc.contributor.authorYilmaz, Eren
dc.contributor.authorGumus, Emre
dc.date.accessioned2024-06-13T20:18:29Z
dc.date.available2024-06-13T20:18:29Z
dc.date.issued2014
dc.departmentİstanbul Gedik Üniversitesien_US
dc.description.abstractIn this study, the fracture toughness of Fe2B boride layer on boronized AISI 304 stainless steel was investigated. Samples were boronized in an indirect heated fluidized bed furnace with Ekabor 1 (TM) boronizing agent at 1123 K, 1223 K, and 1323 K for 1 h, 2 h, and 4 h, respectively. The boride phases were investigated by X-ray diffraction (XRD) analysis. Hardness and fracture toughness of borides were measured via Vickers indentation. With increasing boriding temperature and time the fracture toughness values were reduced. The boride layer thickness formed on the boronized samples ranged between 12 mu m and 176 mu m. The hardness of the borides ranged between 1709 HV0.1 and 2119 HV0.1 and fracture toughness was in the range of 2.19-4.47 MPa x m(1/2) depending on the layer thickness and hardness.en_US
dc.identifier.doi10.3139/120.110621
dc.identifier.endpage693en_US
dc.identifier.issn0025-5300
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-84907982123en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage690en_US
dc.identifier.urihttps://doi.org/10.3139/120.110621
dc.identifier.urihttps://hdl.handle.net/11501/1402
dc.identifier.volume56en_US
dc.identifier.wosWOS:000341921400008en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMaterials Testingen_US
dc.subjectBoronizingen_US
dc.subjectAisi 304 Steelen_US
dc.subjectHardnessen_US
dc.subjectFracture Toughnessen_US
dc.subjectSteelen_US
dc.titleThe Fracture Toughness of Fe2B Formed on Boronized AISI 304en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu