Evaluation of microstructural and mechanical properties of dissimilar Inconel 625 nickel alloy-UNS S32205 duplex stainless steel weldment using MIG welding
Küçük Resim Yok
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer Heidelberg
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Inconel 625 nickel alloy and UNS S32205 duplex stainless steel (DSS) were welded with ER2209 filler metal using MIG (Metal Inert Gas) welding method. The weld metal obtained by DSS filler metal was subjected to mechanical and microstructural evaluation. Toughness and hardness properties had been examined by mechanical and microstructural characterization of weld metal, fusion line, and HAZ (Heat Affected Zone) region, and precipitations were investigated by light microscopy (LM), scanning electron microscopy (SEM), and energy-dispersive spectrometry (EDS). Corrosion behavior of base metals and face and root of weld metal were examined by using potentiodynamic polarization test. Additionally, detailed elemental analysis and mapping of weld metal with both optical emission spectrometer (OES) and X-Ray spectrometer were attained. Results demonstrate a significant decrease in toughness of the welding due to the presence of Nb and Mo rich intermetallic precipitations in the Inconel HAZ and root region, although there is no significant increase in hardness. Potentiodynamic polarization test shows that the dilution-induced microstructural transformation in the root of weld has the worst corrosion resistance in the weld metal. Therefore, this dissimilar welding does not have optimum properties for neither toughness nor corrosion.
Açıklama
Anahtar Kelimeler
Nickel Alloy, Duplex Stainless Steel, Mig, Mechanical Properties, Microstructure, Corrosion, Shielding-Gas, Incoloy 825, Saf 2507, Corrosion-Resistance, Impact Toughness, Welded-Joint, Deposition, Strength, Behavior
Kaynak
Welding in the World
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
64
Sayı
1
